This section is dedicated to technical support information for your MILSIG marker. The Support section is where you can download electronic copies of your Owner's Manual, find Warranty information, view technical schematic diagrams and find answers to the most commonly asked questions. We ask that you please first look over our FAQ section to see if the answer to your question is present. For more technical assistance, please contact us support@milsig.ca

Where can MILSIG K-Series markers be purchased?
MILSIG K-Series markers can only be purchased from authorized dealers of MILSIG in your country. MILSIG is the manufacturer of the K-Series series markers and they do not sell directly to the end customer. We are currently looking for active dealers in Canada to become dealers for MILSIG Canada, please visit the Dealers page for more information on becoming an authorized dealer.

What is the difference between K-Series Makers and “K68 Series” sold by RAP4.com?
They’re the same markers sold under different brand names. RAP4 has been marketing our markers under the “K-Series” or "T68" name.. We ARE the MANUFACTURER and we will be marketing these markers under the “MILSIG” brand and “K-Series” line starting 2008.

Where are MILSIG markers produced?
All MILSIG markers are proudly made in Taiwan.

Do MILSIG markers come with a warranty?
Yes, all MILSIG markers come with a limited 1 year manufacturer’s warranty, visit our support page for further details.

Are there other paintball marker manufacturers that make magazine fed markers?
There’re currently only 3 magazine fed paintball marker manufacturers in the world. RAM makes only 0.43 cal action markers, while ATS is the only other manufacturer that makes 0.68 cal markers. MILSIG markers are priced considerably less while out-performing the competition.

What are some new features on K-Series series markers?
1.) New models
2.) New raised carrying handle and front sight for better sight acquisition
3.) New see through magazines
4.) New extended magazine release button

Can MILSIG markers be customized?
Yes, MILSIG markers are easily customized. K-Series series markers will accept a wide range of accessories made by MILSIG and other manufacturers.

I want a MILSIG marker, but I want other variants other than the M4/ M16, what can I do?
While we currently do not make variants such as the AK47, G36, or Mp5, you can easily purchase readily available front end/ stock kits to fit on K-Series receivers. Any kit that fits Tippmann A5 series will work on TM4s.

How far do these markers shoot?
They have a maximum range of 250 feet and an effective range of 150 feet.

How fast do these markers shoot?
K-Series markers shoot between 280-320fps.

How accurate are these markers?
K-Series markers are some of the most accurate markers on the market today.

Do K-Series markers require maintenance?
Our markers are extremely reliable and need very little maintenance other than the occasional oiling of parts and cleaning of the barrel. Almost all maintenance can be performed by the user.

What is “quick clear” anti chop system?
Once in a while, a paintball will get chopped or break inside the receiver of the paintball marker. In most cases, the marker would have to be taken apart immediately, and the user has to stop shooting. K-Series markers have a revolutionary system that allows a user to keep using the marker even after a ball breaks. The broken paintball is defused inside the receiver, and any paint that gets inside the barrel gets blown out. Normal accuracy will return after 5-6 "clearing" shots. Our markers will never leave you stranded in the heat of battle.

What kind of air system can I use with K-Series markers?
K-Series markers will work with either CO2 or compressed air systems. TM4s have multiple air system mounting points to ensure a fit for every user.

If I start off by purchasing the cheapest K-Series series marker (CQB), can I upgrade to a higher model later on?
Yes, the CQB can be turned into any other K-Series series marker with the purchase of upgrade kits. Consequently, you can change any K-Series model into other K-Series models with MILSIG factory upgrade kits.

Can I use a hopper and a magazine at the same time?
While it’s technically viable to do this, we recommend the user use one feeding mode at a time. When both systems are used simultaneously, the magazine is emptied out before the hopper, thus making the magazine redundant.

How long does it take to change from hopper feed mode, to magazine feed mode?
It takes 2-3 minutes with a flathead screwdriver, or a small coin to change from one feeding mode to the other.

Can I mount optics, flashlights, or laser pointers to K-Series markers?
Yes, accessories such as red dot scopes, rifle scopes, and flashlights can easily fit on K-Series markers. Most accessories that fit on airsoft guns, and even real firearms will fit on K-Series markers.

Can K-Series markers be used for law enforcement?
Yes, K-Series markers can be used effectively for tactical training, and riot control. MILSIG has models specifically made for LE purposes. Please email us for further details.

Can K-Series markers shoot full auto?
While K-Series markers are made to shoot semi-auto only from the factory, it’s possible to convert our markers to shoot full auto or burst with after market parts. We plan to release our own full auto version in the near future.